Bosch Hammer Drill

The Bosch HCBG06 is an 1/4 inch Industrial Hammer Drill Bit. The BlueGranite hammer drill bit deliver fast impact drilling in concrete, stone and masonry. It has low voltage, high temperature brazing which prevents the carbide cutting edge from breaking out even when heat builds up during deep ...

The Bosch HCBG22 is a 3/4 inch Industrial Hammer Drill Bit. The BlueGranite hammer drill bit deliver fast impact drilling in concrete, stone and masonry. It has low voltage, high temperature brazing which prevents the carbide cutting edge from breaking out even when heat builds up during deep ...

The Bosch 11224VS is a 7/8 inch SDS-plus bulldog rotary hammer has a 6.9 Amp motor delivers 0 to 1100 RPM and 0 to 6150 BPM of concrete pounding power. The D-handle design and lightweight body give extra control, especially in overhead applications. Vario-lock positioning allows users to rotate and ...

The Bosch 11225VSRH is a 24V SDS-plus Rotary Hammer Drill. It is ultra-compact and weighs only 9.2 lbs. The 3 Amp-hour battery has a long run time which helps to create 155 1/2 inch holes by 1/2 inch deep from a single charge. The battery gauge displays six stages of remaining charge levels and the ...

The Bosch HC4510 is a 1/2 inch x 6 inch x 11 inch Spline Shank Rotary Hammer Drill Bit. The spline rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.

The Bosch 1199VSR is a 1/2 inch Variable Speed Reversible Dual Range Hammer Drill. The drill is powered by 8.5 Amp motor. The 1/2 inch dual-torque performs at 0-1100/3000 RPM and 0-18000/48000 BPM. Rotating brush plate allows tool to offer equal power in forward and reverse for backing out bound-up ...

The Bosch 24V hammer drill/driver features a full metal collar, unibody powertrain and DuraShield housing. Ratcheting single-sleeve 1/2 inch chuck with carbide teeth. Two-speed gearbox optimized for two modes of operation-High torque mode produces over 475 inch/pounds of torque. High speed mode ...

The Bosch HCBG07 is an 1/4 inch Industrial Hammer Drill Bit. The BlueGranite hammer drill bit deliver fast impact drilling in concrete, stone and masonry. It has low voltage, high temperature brazing which prevents the carbide cutting edge from breaking out even when heat builds up during deep ...

The Bosch HCBG16 is a 1/2 inch Industrial Hammer Drill Bit. The BlueGranite hammer drill bit deliver fast impact drilling in concrete, stone and masonry. It has low voltage, high temperature brazing which prevents the carbide cutting edge from breaking out even when heat builds up during deep ...

Packing 8.5 amps of torque power, the Bosch 1/2" Dual Torque Hammer Drill will plough through any masonry that comes its way. Its compact and ergonomic design feels good in hand for less operator fatigue. A dual mode selector easily converts from rotation to hammer-drill mode. A two-speed gearbox ...